Products

WM15M-43C Washmate Electric Pressure Cleaner

  • ThoroughClean WashMate WM15M-43C
  • Cold Wash Bay Water Blaster – Electric.
  • Built to Mine Spec
  • Electric 415v 3 Phase 15 HP / 11 kW Motor (20 Amp)
  • HAWK Triplex Pump (Hawk XLT1830IR Triplex Pump)
  • Set to 3400 psi @ 18 LPM Flow Rate
  • Coupling
  • Fully Hot Dip Galvanized Pedestal Frame
  • Stainless Steel Water Break Tank with low water shut down.
  • Timed auto shut off
  • Pneumatic accumulator
  • Heavy Duty Galvanized Hose Reel
  • 30m of 3/8 R2 Double Wire HP Hose
  • Professional Gun, Stainless Steel Lance & Nozzle.

 

Mine Spec Features Include:

  • Emergency Stop

Power Source

  • WEG heavy-duty 15 HP (11kW) electric motor – class ‘H’ wound.
  • 415 volt, three-phase
  • Star-Delta soft starter, in the stainless steel control box.
  • Requires 32A C-Curve Circuit Breaker

Pump

  • HAWK XLT2230 Triplex Pump rated at 4350 PSI max @ 18 LPM.
  • The pump is de-rated** to 3400 PSI to prolong pump life.
  • Ceramic sleeved stainless steel piston plunger rods and brass pump head.
  • Low-speed pump at 1450 RPM.

By-pass Valve

  • Pulsar Zero
  • Low water supply
  • Timed by-pass shutdown

Supply

  • Water supply is via an over-sized industrial water filter to protect the pump from water line debris.
  • Stainless steel water break tank with float switch to shut the motor down on low water supply – protects the pump against cavitation & dry running – extending pump life.

Delivery

  • Heavy-duty glycerine-filled pressure gauge rated to 10,000 PSI.
  • Heavy-duty galvanized hose reel.
  • 30m R2 thick wall 3/8”
  • HP Hose: Rated to 5000 PSI / 4x burst rating / Hose end sleeved for operator protection.
  • Italian-made dry gun with 900mm insulated stainless steel lance. / Stainless steel fan nozzle. / Pneumatic accumulator to absorb pressure spikes.

Frame

  • Fully hot-dipped galvanized steel frame.
  • Vibration mounted control box with hour meter.

Trusted by leading companies

Send an enquiry

"*" indicates required fields

This field is for validation purposes and should be left unchanged.